Firmware: BLHeli_S V16.6 A-H-20
Max continuous load: 30 amps
Burst Current: 40A / 10sec
Lipo Cells: 2 to 5 cells
MCU: SILABS EFM8BB2 48MHz
Peso: 3.6g (board) 6.5g (total with wires and connectors)
PCB size: 26mm L*14.5mm W
ESC height: 6mm
Signal wire: 150mm
Power wire: 100mm
Suppot regular 1-2ms pulse width input, as well as Oneshot125(125-250us),
Oneshot42 (41.7-83.3us) , Multshot(5-25us),Dshot150,Dshot 300 and even Dshot600and automatically detected by the ESC
High quality N-FET, half-bridge drive and PCB specialized for cooling, only flashed with BLHeli_S firmware.
Pre-flashed with the settings below.